How to Draw Glasses in Paint Tool Sai
Wearing specs can change the atmosphere of a character, right?
In this clause, we'll show you how to make a theatrical role wearing away glasses.
When drawing glasses, the key points are the position of the glasses and the expression of the lenses.
Let's strike a look at the making of glasses, paying attention to these two points.
1. Determine the set back and draw the glasses
1-1. Take a bite
IT is uncheckable to draw the glasses straight outside, so the first thing to serve is to take a bite of where to guide the glasses.
The start thing to do is to draw the bite of the glasses.
First, create a new layer and draw a rectangle with the shape tool.
Next, let's adjust the depth and shape with the "Free Transmute Tool" in the Scaling tool.
1-2. Make a draft
After making a scabrous sketch, you keister start drafting.
The draft testament be drawn on a red-hot layer separate from the Atari.
The crystalline lens should be placed where the pupil (the red divide in the picture above) is in the midst when viewed from the front.
If you draw the nosepiece first, it volition be easier to get a sense of the distance between the lens and the pupil, so we will draw the bridge first and then the lens shape.
1-3. Withdraw the lines
Once the order of payment is done, it's time to make a fairly drawing.
Commencement, lower the "Opacity" of the layer where you drew the draught.
Close, create a new layer and draw the lines for the glasses.
Here, the drawing is done freehand, but for a sharper bet, we recommend using a straight strain puppet.
If you use the straight ancestry tool with the edge write out brush selected, you can easy draw the edge of the glasses straight.
If you want to make the inside of the edge write transparent and take out only lines, create an 8-bit bed and draw on information technology.
If you want to make the inside of the pen transparent and just draw the lines, produce an 8-bit layer and draw on it. Paint the people of color on another vividness layer.
1-4. Paint colors and add shadows and fat-free
Once the lines are drawn, it is time to paint the color of the specs.
After painting the base color of the glasses, draw in shadows and light to make it look three-dimensional.
2. Representation of the lens
If you draw the edge of the glasses, they will look like glasses by themselves.
However, if you exclusive draw the edge, it Crataegus laevigata look as if there is no lens. ……
In such a case, drawing the light reflected in the crystalline lens will make it look much alike glasses.
2-1. Draw the reflection of lights and sky
There is a way to withdraw light much as lighting as an expression of the lens.
Therein case, I tried to draw an image of lighting-up from indoor lighting beingness reflected in the moving-picture show.
First, draw the reflections on a new level with a pen operating room airbrush.
In this type, I chose the color white and John Drew it on the upper part of the lens because I wanted the image to be a reflection of the fluorescent light.
You can modification the color and location of the reflection depending on what is being reflected, for instance, if the reflection is from a computer, you can pull down a bluish light at the prat of the lens.
After drawing the observation, set the layer to "Overlay" and line up the color deepness with "Opacity".
This completes the representation of the reflection.
2-2. Delineate Christ Within on the edge of the lens
Additionally to the reflection, you can also thread light connected the edge of the lens.
Here, draw a white line of merchandise on a new layer with a pen or airbrush and Set the layer to "Add (Luminous)".
Past adjust the light with opaqueness and you are done.
2-3. Expressing contour distortion
Combined way to express the lens of eyeglasses is to draw the distortion of the outline.
In this case, the straining is unambiguous past adjusting the part of the hair that is inside the glasses somewhat internal.
In this example, all three methods of lens expression are used, only information technology is possible to limited lenses victimization merely one method.
Away all way, try draft a lens using the method that suits you best!
3. If you shift the billet of the spectacles a little ……
When you get finished drawing the spectacles, draw the shadow of the glasses to discharge the picture.
If you lower the top edge of the glasses down to the eyeline, the glasses will shift a bit, giving a rougher look.
If you privation to shift the glasses further bolt down, the lenses will be tilted more forward, so set the overall shape to match the angle.
The shape and colouring of the eyeglasses, likewise Eastern Samoa the fashio they are clapped out, can greatly deepen the impression of the character.
Please sample drawing glasses in various ways.
How to Draw Glasses in Paint Tool Sai
Source: https://medibangpaint.com/en/use/2021/01/draw-glasses-characters/
0 Response to "How to Draw Glasses in Paint Tool Sai"
Post a Comment